High Frequency Screen
The high-frequency screen is a type of efficient vibrating screening equipment widely applied in mineral processing, coal preparation, chemical industry, building materials and other industries. It is designed based on the principle of high-frequency, low-amplitude vibration, which can effectively separate fine-grained materials according to particle size.
- Product Introduction
Introduction
The high-frequency screen is a type of efficient vibrating screening equipment widely applied in mineral processing, coal preparation, chemical industry, building materials and other industries. It is designed based on the principle of high-frequency, low-amplitude vibration, which can effectively separate fine-grained materials according to particle size.
Different from traditional vibrating screens, the high-frequency screen is equipped with a high-frequency vibration motor as the core power source. The high-frequency vibration generated by the motor can make the fine particles on the screen surface produce rapid jumping movement, which accelerates the stratification of materials and the passing of undersize particles, thus realizing efficient classification of materials. It is especially suitable for the screening of fine-grained materials with particle size below 10mm, and has significant advantages in improving product quality and reducing energy consumption.
Characteristics
The high-frequency and low-amplitude vibration mode can effectively overcome the phenomenon of material blocking the screen holes. Fine particles can quickly pass through the screen surface, and the screening efficiency can reach more than 95%, which is much higher than that of traditional vibrating screens.
Good classification effect
The equipment can accurately separate materials according to the preset particle size range, which helps to improve the uniformity of product particle size. This characteristic is particularly important in mineral processing, as it can improve the grade of concentrate and the recovery rate of useful minerals.
Low energy consumption and small floor space
The high-frequency screen adopts an optimized structural design, and its power consumption is only 30% - 50% of that of traditional screening equipment with the same processing capacity. Meanwhile, the equipment has a compact structure, small volume and small floor space, which is suitable for production sites with limited space.
Long service life of vulnerable parts
The screen surface of the high-frequency screen is usually made of high-wear-resistance materials such as polyurethane or stainless steel. These materials have good wear resistance and corrosion resistance, which can extend the service life of the screen surface and reduce the cost of equipment maintenance and replacement of vulnerable parts.
Strong adaptability
It can adapt to the screening of various materials, including wet, sticky and fine-grained materials. By adjusting the vibration frequency, amplitude and screen surface inclination angle, it can meet the different screening requirements of various industries, with strong flexibility and versatility.
Parameter Table
|
MODEL |
POWER |
SIEVE DIAMETER |
MAXIMUM EXCITING FORCE |
|
XCG-600 |
0.55KW-0.75KW |
560mm |
5000N |
|
XCG-800 |
0.75KW-1.50KW |
760mm |
8000N |
|
XCG-1000 |
1.1KW-1.5KW |
1000mm |
10000N |
|
XCG-1200 |
1.5KW-2.3KW |
1130mm |
15000N |
Hot Tags: high frequency screen, China high frequency screen suppliers, factory, 450 Filter Sieve, circular vibration screen, High Frequency Screen, Plastic Vibration Screen, Rotary Vibration Screen, Ultrasonic Vibration Screen
