
QVC-1 Pneumatic Vacuum Loader
Automatic Pneumatic Conveying for Powder and Granule Products Description The QVC-1 Pneumatic Vacuum Feeder is a compact, air-driven conveying unit developed for automatic, dust-free transfer of powder and granular materials. Instead of an electric vacuum pump, the machine uses compressed air to...
- Product Introduction
Automatic Pneumatic Conveying for Powder and Granule
Products Description
The QVC-1 Pneumatic Vacuum Feeder is a compact, air-driven conveying unit developed for automatic, dust-free transfer of powder and granular materials. Instead of an electric vacuum pump, the machine uses compressed air to generate negative pressure inside a sealed hopper, so material is lifted through a hose and discharged at the required point of use. With a hopper volume of only 1.1 L and a hopper size of Φ140 × 490 mm, the QVC-1 Pneumatic Vacuum Feeder occupies very little space and can be installed directly beside a mixer, sifter, reactor, filling machine or packaging line. It is a practical upgrade for workshops that currently rely on manual bucket feeding.
Working Principle
External compressed air at 0.6‑0.8 MPa enters the Compressed Air Backflush System. By means of the air‑jet vacuum effect, negative pressure is created inside the Stainless Steel Feed Hopper. Under pressure difference, raw materials are sucked through the Suction Pipeline into the hopper chamber. The Stainless Steel Filter Element blocks fine powder while allowing air to pass through, preventing powder from escaping into the air circuit.
After one feeding cycle finishes, air supply for vacuum generation stops. The Blade‑Type Oscillating Cylinder drives the Discharge Gate to open, and materials fall down to downstream equipment by gravity. Afterwards, the Compressed Air Backflush System triggers pulse air blowing. High‑pressure air cleans powder residue attached on the surface of Stainless Steel Filter Element, restoring filter permeability for the next feeding loop. The whole feeding‑discharging‑back‑blowing sequence is controlled automatically by the internal circuit of the Control Box. No manual intervention is required during normal operation.
Technical Parameters
| Item | QVC‑1 |
|---|---|
| Power Supply | 220V |
| Transport capacity | 100‑350 kg/h |
| Hopper volume | 1.1 L |
| Working pressure | 0.6‑0.8 Mpa |
| Hopper dimensions | Φ140*490 mm |
| Note: Conveying capacity is tested with flour, lifting height 3 m, horizontal distance 2 m, for reference only. | |

Core Advantages
Fully pneumatic vacuum source: avoids electric‑spark hazards
Closed conveying path: suppresses dust flying and material cross‑contamination, replaces heavy manual feeding.
Automatic pulse back‑blowing: keeps Stainless Steel Filter Element clean to maintain stable feeding performance for continuous‑shift production.
Compact size: hopper dimension Φ140*490 mm, easy to install above mixers and reactors.
Reliable branded pneumatic & electric components, lower failure rate and easy maintenance.

Application Scenarios
The QVC‑1 Pneumatic Vacuum Feeder works well for food additives, pharmaceutical auxiliary materials, fine chemical powder, pigment and mineral powder. It can be matched with mixers, sifters and buffer hoppers to realize automatic raw‑material feeding.
Hot Tags: qvc-1 pneumatic vacuum loader, China qvc-1 pneumatic vacuum loader suppliers, factory, bowl feeder machine, bulk feeder, component feeder, Electric Vacuum Feeding Machine, small vibratory bowl feeder, vibrating feeder









