Electromagnetic Vibration Feeder
An electromagnetic vibrating feeder is a device that uses an electromagnetic vibrator to drive the feeding trough, making materials perform parabolic reciprocating vibration along the trough, so as to realize uniform and quantitative conveying of materials.
Its core working principle is as follows: after the electromagnetic coil in the electromagnetic vibrator is connected with alternating current, it generates periodic electromagnetic suction, drives the elastic elements between the feeding trough and the base to vibrate, and then pushes the materials to move forward.
- Product Introduction
Equipment Introduction
An electromagnetic vibrating feeder is a device that uses an electromagnetic vibrator to drive the feeding trough, making materials perform parabolic reciprocating vibration along the trough, so as to realize uniform and quantitative conveying of materials.
Its core working principle is as follows: after the electromagnetic coil in the electromagnetic vibrator is connected with alternating current, it generates periodic electromagnetic suction, drives the elastic elements between the feeding trough and the base to vibrate, and then pushes the materials to move forward.
Widely used in mining, metallurgy, coal, building materials, chemical industry, food and other industries, this equipment can be used as a front-end feeding device for production lines such as crushing, screening and packaging, realizing automatic batching and conveying.
Core Features
The vibration frequency and amplitude can be precisely controlled by adjusting the current and voltage of the electromagnetic vibrator, realizing stepless speed regulation feeding of materials to meet the quantitative batching requirements of different production lines.
The whole machine has no rotating parts, mainly composed of feeding trough, electromagnetic vibrator, elastic elements and base, with low failure rate; daily maintenance only needs to check the wear of elastic elements and the insulation performance of coils, with convenient operation.
Driven by electromagnetic vibration, it does not need transmission mechanisms such as motors and reducers, and its energy consumption is much lower than that of mechanical transmission feeders; the vibration frequency is stable, the operation noise is low, improving the workshop working environment.
It can convey materials in various forms such as granular, powdery and blocky. The trough material can be carbon steel, stainless steel, wear-resistant rubber, etc., adapting to special working conditions such as corrosion, high temperature and abrasion.
With fast response speed, it can quickly realize start, stop and speed regulation, and can be linked with PLC control system to meet the linkage control requirements of automatic production lines.
|
Model |
Processing Capacity (t/h) |
Feed Size |
Voltage |
Power |
Working |
Indicator Current (A) |
Double Amplitude (mm) |
Weight (kg) |
|
GZ1 |
5-7 |
50 |
220 |
0.055 |
1.34 |
1 |
1.75 |
75 |
|
GZ2 |
8-14 |
50 |
0.15 |
3.0 |
2.3 |
146 |
||
|
GZ3 |
20-35 |
75 |
0.2 |
4.58 |
3.8 |
217 |
||
|
GZ4 |
40-70 |
100 |
0.45 |
8.4 |
7 |
412 |
||
|
GZ5 |
80-140 |
150 |
0.75 |
12.7 |
10.6 |
656 |
||
|
GZ6 |
120-200 |
200 |
380 |
1.5 |
16.4 |
13.3 |
1.5 |
1252 |
|
GZ7 |
200-300 |
250 |
3 |
24.6 |
20 |
1920 |
||
|
GZ8 |
300-550 |
300 |
4 |
39.4 |
32 |
3040 |
||
|
GZ9 |
500-850 |
350 |
5.5 |
47.6 |
38.6 |
3750 |
||
|
GZ10 |
800-1000 |
500 |
4X2 |
39.4X2 |
32X2 |
6490 |
Hot Tags: electromagnetic vibration feeder, China electromagnetic vibration feeder suppliers, factory, Dust Free Feeding Station, Electromagnetic Vibration Feeder, feeder equipment, Motor Vibration Feeder, Vibrating Bench, vibration feeder
